1. HEAT TRANSMISIONS FINS
   For a greater heat exchange
2. BAFFLE
   With the flat top of the unit, this part maintains a high temperature under this baffle and complete wood combustion.
3. DAMPER
   Removable to facilitate chimney sweeping. Adjustable to control the rate of burning and to reduce heat loss and maximises overall efficiency.
4. FLAT TOP
   The essential power of your unit. This design provides optimal recovery of smokes before evacuating it at high speed (Venturi effect with baffle) Wood stoves have used this technology for centuries.
5. ADJUSTABLE DEFLECTOR
   This device prevents smoke to come into the heat chamber when door is opened with severe weather conditions. (smoke down draught) and by the way prevent smokes through the hot air vent and black spots on the ceiling above
6. AIR CONTROL
   Secondary fresh air inlet to maintain your glass clean as long as possible with a flow of fresh air from top to bottom of the glass. At the same time this mixture of air/smoke provides environmentally friendly cleaner combustion.
7. HANDLE
   A cold handle that allows safe opening of the door even when the fire is really hot.
8. ASH PAN
   Easy clean slide-in/out ash pan. Its " shovel" design facilitates de-ashing keeping your house clean. Fresh air control : governs the rate of burning with 3 positions :3 for maximum fire, 2 during the day and 1 for a slow and overnight burning.

Technology Design/Grand Vision

1. Synchronized raising system uses a stainless steel axis mounted on high-performance bearings. Accessible via detachable covers.
2. Raising system guide rail for flexibility and efficiency. Silicon stoppers at top and bottom allow for smooth stopping action.
3. Secondary airflow, specifically for keeping window glass clean and clear, and to ensure an appropriate balance of pre-combustion fumes.
4. Steel door, screen-printed with vitroceramic glass, is mounted externally for a better view of the fire. Lateral, horizontal and vertical opening door. The door can be dismantled from the inside of the fireplace
5. Stainless steel door frame can withstand cleaning products.
6. A balance of primary air and an air-wash system make it easy to light your fire.
7. Feet can be adjusted from inside the fireplace, after the chimney has been installed (up to 50 mm). Can be installed with or without 140cm extension.
8. 60mm-thick fire-brick hearth maintains a high-combustion temperature. A substantial layer of ash allows the fire to self-regulate. Inside of fireplace can be cleaned using ash extractor provided.
9. Convection air reheats upon contact with the heating unit and exchanger.
10. Interior lined with 50mm-thick moulded fire-brick for greater heat accumulation.
11. Detachable primary deflector.
12. Secondary deflector can be dismantled for chimney sweeping.
13. Transverse heat exchanger to maximize heat recovery.
14. Top fairing boasts 4 hot-air outlets with diameter of 150mm and small connection flanges.